Manual Heat Press Machine
Your Present Position:Products > High Pressure Heat Press Machine > New Design High Pressure Heat Press Machine XY-004-3
New Design High Pressure Heat Press Machine XY-004-3

Model No.: XY-004-3
Size: 38*38cm


※Aluminum heating plate
※Anti-scald protecting cover
※Strong springs
※Elegant outlook
※ U-shape design


      (Accept OEM color)

1) Pressure Handle                         2) Temp/Time Controller               

3) Pressure Adjustment Knob         4) Anti-scald Protecting Cover        

5) Heat Platen                                6) Heat-resistant Silicone Pad    

7) Lower Aluminum Platen             8) Stainless Steel Solid Screw           

 9) Power On/Off Switch                10) FUSE            

11) Hole Socket              12) Unique U-shaped  Lower Platen Stander


Model No.  XY-004-3
Machine Type Aluminum heating plate,Anti-scald protecting cover,elegant outlook,U-shape design
Name New Design High Pressure Heat Press Machine
Controller digital panel
Voltage   110V/220V
Power 1800W
Time Range   0-999sec.
Max. Temp.   399°C 
Printing Area 38*38CM
Pringting Thickness up to 70mm
Gross Weight 22kg
Package Size 725*440*420mm

  Can be sublimated logo or type, solvent type ink, high temperature and pressure, and a certain amount of time, heat transfer printed cotton, hemp, chemical fiber, metal, ceramic, glass and other material, can also be used for flocking heat transfer and heat treatment of foaming printing, convenient and practical. 

Export  standard carton


①Please the material on working table,adjust the pressure knob get right pressure required
②Connect power plug and turn on power
③Set time & temp you want with temp/time gauge get required numbers.
④The temp for heating plate will start to rise up, when it reaching temp you set, please the material on the working tale and close the handle.
⑤The buzzer will sound when reaching time you set, release the handle and take out the material

1)     Setting the Target Temperature: Press the “SET” key, when panel shows “ SP” , then press the (up) or▼ (down) to set the temperature. You may refer to “Suggested Time and Temperature” to determine the suitable temperature and time according to the materials you intend to use.

2)     Setting the Target Time: Press the "SET" key, when panel shows “SL” , then press the (up) or ▼ (down) to set the time.

3)     Press the "SET" again for two seconds to save the temperature and time settings.

4)     Working Temperature: After you save the target temperature and time, the panel will show the working temperature, which is the current temperature of the heat plate. The heat plate will take some time to warm up. Please wait until the working temperature reaches the target temperature - only then the machine is ready to use.


  A heat press machine is the machine that presses a transfer onto an imprintable substrate. Using high temperatures and pressures for a certain amount of time, the transfer is permanently embedded into the product.
  Heat presses are recommended for professional and satisfying results simply because standard laminating devices and home hand irons can not get even near the temperatures required for a reliable transfer.

Office Address: Room #1423-1425, Minjie Kechuang Center Building No.#1, Private Science-Tech Park, Baiyun District, Guangzhou.

Factory Address:Longhe Road  ,Dagangling Village ,Zhongluotan Town,Baiyun District ,Guangzhou, China




Fields marked with * are required
Sale Team
Kenfor Lighting86 job86 trade86 wanggou86